Taski Nobile Plus High Marbel Crystallizer

Direction of Use

• If the floor has visible scratches, then hone the surface using 400 grit diamond pad for 2 mins per sqm and followed
  by 1800 or 2000 grit diamond pad for 5 mins per sqm before subjecting to the crystallization.
• Use 1% neutral cleaner solution and clean the surface using single disc machine with red pad and then vacuum it.
  Ensure proper rinsing with water to remove all dirt particles. Prepare paste by taking 3 parts of Nobile Plus and 1 part
  of water. Use 40 gm paste per m².
• Damp the floor using wet mopping. Ensure it is just moist and no excess water on floor. Its extremely important to
  have the floor slightly moist before the application of Nobile Plus.
• Spread the paste in the center of the application area. Place a 175 RPM single disc machine weighing a minimum of
  110 pounds (50 kg), fitted with a red pad, directly on top of the paste.Begin spreading the paste equally over the entire area to be treated.
• Buff for 3-4 mins per m². Do not allow the paste to dry. Sprinkle a little water whenever required to maintain a creamy
  paste.
• At the end of crystallization, dilute the slurry with fresh water, pick it up with a wet vacuum cleaner. Flood and agitate
  the section thoroughly with plenty of neutral cleaner solution to ensure complete product rinse-off. Remove the
  solution with a wet vacuum cleaner.
• After the floor dries completely, dry buff with a single disc machine, 200–1500 rpm, fitted with soft white pad.